Centerfire Models (New bolt release)
MAKE SURE THE FIREARM IS NOT LOADED!
1. Put the safety in the fire position
2. Pull the trigger and hold back
3. Press bolt release button in front of trigger guard and pull bolt out
Centerfire Models (Old bolt release)
MAKE SURE THE FIREARM IS NOT LOADED!
1. Put the safety in the fire position
2. Pull the trigger and hold back
3. Press down on sear (lever on side of the receiver) and pull bolt out
Muzzle Loader (10ML & 10MLII)
1. Remove rear action screw (front trigger guard screw)
2. Remove bolt
Rimfire Models
MAKE SURE FIREARM IS NOT LOADED!
1. Put the safety in the fire postion
2. Pull trigger and hold back
3. Pull bolt out